Aircraft Sheet Metal Mechanic I

AAR is the place of choice to build an inspiring career. The Sheet Metal Technician I is responsible for high proficiency in all minor through major repairs, modifications, E.A.s, with minimal supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES Highly proficient in fabrication, cold working, flap peening and jacking/shoring aircraft. Highly proficient in using technical data and drawings to locate part numbers and accomplish repairs. Ensure work performed adheres to high quality standards. Effectively direct the work of less experienced mechanics. All other duties as assigned. CORE COMPETENCIES Commitment to company values and ethics Dependability: personally responsible, completes work in a timely manner, and performs tasks accurately Motivation: must maintain a positive attitude and strong work energy. Organization: very detail oriented and always comes prepared Communication: excellent interpersonal and oral and written communication skills Initiative: plans work and carries out tasks without detailed instructions, prepares for problems or opportunities in advance, undertakes additional responsibilities Analytical skills: must be able to gather information and use data to determine cause and effect for complex problem solving. AAR is the place of choice to build an inspiring career. The Sheet Metal Technician I is responsible for high proficiency in all minor through major repairs, modifications, E.A.s, with minimal supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES Highly proficient in fabrication, cold working, flap peening and jacking/shoring aircraft. Highly proficient in using technical data and drawings to locate part numbers and accomplish repairs. Ensure work performed adheres to high quality standards. Effectively direct the work of less experienced mechanics. All other duties as assigned. CORE COMPETENCIES Commitment to company values and ethics Dependability: personally responsible, completes work in a timely manner, and performs tasks accurately Motivation: must maintain a positive attitude and strong work energy. Organization: very detail oriented and always comes prepared Communication: excellent interpersonal and oral and written communication skills Initiative: plans work and carries out tasks without detailed instructions, prepares for problems or opportunities in advance, undertakes additional responsibilities Analytical skills: must be able to gather information and use data to determine cause and effect for complex problem solving. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. EDUCATION and/or EXPERIENCE High school diploma or general education degree GED required. Must have a minimum of 5 years related aviation sheet metal experience and/or training. May or may not have an A (airframe) or P (powerplant) license. Previous experience in warehousing, handling inventory, and bar code equipment. PHYSICAL DEMANDS/WORK ENVIRONMENT Constantly: Lifting 10 lbs., standing, walking, wrist flexion and extension, environmental weather conditions. Frequently: Lifting ≤40 lbs., push/pull 20’, and basic depth perception (shapes). Working at elevated heights ≥4’, working on ladders, scaffolding, uneven surfaces, and energized parts. Occasionally: Lifting and/or carry ≤50 lbs., sitting, basic color vision, operation of motorized or electrical equipment, push/pull #LI-TK1 #LI-DT1 QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. EDUCATION and/or EXPERIENCE High school diploma or general education degree GED required. Must have a minimum of 5 years related aviation sheet metal experience and/or training. May or may not have an A (airframe) or P (powerplant) license. Previous experience in warehousing, handling inventory, and bar code equipment. PHYSICAL DEMANDS/WORK ENVIRONMENT Constantly: Lifting 10 lbs., standing, walking, wrist flexion and extension, environmental weather conditions. Frequently: Lifting ≤40 lbs., push/pull 20’, and basic depth perception (shapes). Working at elevated heights ≥4’, working on ladders, scaffolding, uneven surfaces, and energized parts. Occasionally: Lifting and/or carry ≤50 lbs., sitting, basic color vision, operation of motorized or electrical equipment, push/pull #LI-TK1 #LI-DT1

{
  "content_hash": "08b3e231f5c9f370c8c8c3a2146a7c6678281936fb4c3a0af1d1c5316deee3f2",
  "source_hash": "65692307c3f1a8a8e68c041a7fe216281b91f0e99b8b7edcfb582098e57e0943",
  "last_changed_at": "2026-06-05T03:49:39.055Z",
  "active_status": "active"
}

{
  "language": "en",
  "location": {
    "raw": "United States-Oklahoma-Oklahoma City-Oklahoma City - Aircraft Services",
    "city": "Oklahoma City-Oklahoma City - Aircraft Services",
    "region": "OK",
    "country": "United States",
    "is_remote": false,
    "confidence": 0.95
  },
  "salary_max": null,
  "salary_min": null,
  "inferred_at": "2026-06-06T19:24:55.849Z",
  "launch_scope": {
    "reason": "english_us_canada",
    "included": true,
    "language": "en",
    "location": {
      "raw": "United States-Oklahoma-Oklahoma City-Oklahoma City - Aircraft Services",
      "city": "Oklahoma City-Oklahoma City - Aircraft Services",
      "region": "OK",
      "country": "United States",
      "is_remote": false,
      "confidence": 0.95
    },
    "countries": [
      "United States"
    ]
  },
  "remote_policy": null,
  "salary_period": null,
  "workplace_type": null,
  "salary_currency": null
}

{}

{
  "list_job": {
    "raw": {
      "draft": false,
      "jobId": "305681",
      "column": [
        "Aircraft Sheet Metal Mechanic I",
        "[\"United States-Oklahoma-Oklahoma City\"]",
        "May 22, 2026"
      ],
      "hotJob": false,
      "contestNo": "17100",
      "toReApply": false,
      "linkedColumn": 0,
      "addedToJobCart": false,
      "alreadyAppliedOn": false,
      "locationsColumns": [
        1
      ]
    },
    "jobId": "305681",
    "title": "Aircraft Sheet Metal Mechanic I",
    "legacy": false,
    "category": null,
    "schedule": null,
    "contestNo": "17100",
    "detailUrl": "https://aarcorp.taleo.net/careersection/2/jobdetail.ftl?job=305681&lang=en",
    "locations": [
      "United States-Oklahoma-Oklahoma City"
    ],
    "postingDate": "May 22, 2026"
  },
  "detail_meta": {
    "url": "https://aarcorp.taleo.net/careersection/2/jobdetail.ftl?job=305681&lang=en",
    "http_status": 200,
    "content_type": "text/html;charset=UTF-8",
    "response_bytes": 76130
  },
  "detail_errors": [],
  "detail_values_count": 37
}