Manufacturing Engineer

About Mach Industries Founded in 2022, Mach Industries is a rapidly growing defense technology company focused on developing next-generation autonomous defense platforms . At the core of our mission is the commitment to delivering scalable, decentralized defense systems that enhance the strategic capabilities of the United States and its allies. With a workforce of approximately 220 employees , we operate with startup agility and ambition. Our vision is to redefine the future of warfare through cutting-edge manufacturing, innovation at speed, and unwavering focus on national security. We are dedicated to solving the next generation of warfare with lethal systems that deter kinetic conflict and protect global security. The Role Mach Industries is seeking a Manufacturing Engineer to own the industrialization of our products for high-rate production. In this role, you will work closely with the Product Engineering, Build Engineering, and Manufacturing Operations teams to design, validate, and launch high-volume manufacturing systems using cutting-edge Manufacturing Engineering techniques. This role is focused on building at scale— delivering reliable hardware at speed. At Mach Industries, we are building decentralized, autonomous systems to maintain an allied American edge in modern warfare. As a Manufacturing Engineer, you will play a pivotal role in developing flexible, adaptable manufacturing systems that enable rapid production at scale. Working with a world-class engineering team, you will bridge the gap between design and rate-manufacturing, delivering solutions that ensure manufacturability, cost-efficiency, and maximum speed of ramp. Key Responsibilities Take extreme ownership of production planning from late-stage prototype builds through Mass-Production ramp at Mach’s Forge Factories. Design high-throughput manufacturing systems that achieve world-class First-Pass-Yield at target cycle times. Drive product design optimization using first-principles DFM/A — focusing on part count and complexity reduction, tooling/equipment compatibility, and poka-yoke implementation. Develop and execute fast-paced, robust Manufacturing launch schedules. Lead cross-functional Make vs. Buy studies with supply chain to secure rate-capable vendors and on-time part availability. Lead Manufacturing Virtual-Build events, covering fabrication feasibility/optimization, assembly sequencing, clearance analysis (hand/tool/material), GD&T, DVA, part presentation and handling, and tolerance stack-up risks (among other topics). Define the full manufacturing system via coherent MBoM, BoP, and BoE datastructures, captured in EasyPlan, DELMIA, Heliux, or an equivalent supporting tool. Collaborate with controls engineering to ideate, deploy automation cells and conveyance; project-manage vendors through Factory Acceptance Testing (FAT) and onsite bring-up (SAT). Own headcount/equipment capacity planning, OPEX/CAPEX estimates, PMTS cycle time analysis (MODAPTS/MOST/MTM), factory layouts (AutoCAD), and NIOSH-compliant ergonomics. Support PFEP (dunnage & material display), release controlled work instructions/quality gates in MES, and provide daily production support during validation and factory production ramp. Drive quality with SPC, PFMEA, 8D root cause analysis, and continuous improvement alongside technicians and cross-functional teams. Required Qualifications Bachelor’s degree in industrial & systems, mechanical, aerospace, manufacturing engineering, or equivalent experience. 3-5+ years in manufacturing, process engineering, or industrialization roles(internship and school projects experience qualifies). Strong background in process documentation and quality systems. Familiarity with GD&T, tolerance analysis, and process capability. Hands-on experience with shop floor processes (machining, welding, composites, additive manufacturing, assembly, test). Experience designing components and assemblies through first-principles application of DFM/A strategies. Experience using first-principles approach to solving complex engineering problems. Familiarity with Manufacturing System Optimization strategies in high-volume production environments. Proficient in CAD, preferably Siemens NX, Catia, Solidworks. Exceptional verbal and written communication skills, with the ability to collaborate effectively in a global environment. Eagerness to learn and adapt in a dynamic startup environment. Bar-raising analytical and problem-solving skills with high attention to detail. Self-directed with a positive attitude and team spirit. Preferred Qualifications Experience in high-volume and/or high-tech Manufacturing environments, including but not limited to Automotive and Aerospace Technology organizations Experience leveraging Lean Six Sigma manufacturing principles during the planning, ramp, and steady state production phases of the launch cycle. Proficient in Engineering Probability and Statistics based problem-solving, preferably using software tools (Minitab, etc.). Experience with Discrete Event Simulation Softwares (Simio, Arena, Simul8, etc). Demonstrated knowledge of Manufacturing Ergonomic Standards, incl. NIOSH. Knowledge of PMTS methods for calculating predicted cycle times. Experience authoring DFMEA/PFMEA engineering assessments. Disclosures This position may require access to information protected under U.S. export control laws and regulations, including the Export Administration Regulations (EAR) and the International Traffic in Arms Regulations (ITAR).  Please note that any offer for employment may be conditioned on authorization to receive software or technology controlled under these U.S. export control laws and regulations without sponsorship for an export license. Mach participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offers may vary based on (but not limited to) work experience, education and training, critical skills, and business considerations. Highly competitive equity grants are included in most offers and are considered part of Mach’s total compensation package. Mach offers benefits such as health insurance, retirement plans, and opportunities for professional development. Mach is an equal opportunity employer committed to creating a diverse and inclusive workplace. All qualified applicants will be treated with respect and receive equal consideration for employment without regard to race, color, creed, religion, sex, gender identity, sexual orientation, national origin, disability, uniform service, Veteran status, age, or any other protected characteristic per federal, state, or local law, including those with a criminal history, in a manner consistent with the requirements of applicable state and local laws. If you’d like to defend the American way of life, please reach out!

{
  "content_hash": "15a911af49de9f00a17a2e4eb2f8799ad2e6d4d688717788217c2e252a44e1f2",
  "source_hash": "e6c17dc1bc16706bc4f9f307cf3814a5252914908b5613647c6e794b22759788",
  "last_changed_at": "2026-05-30T07:58:41.791Z",
  "active_status": "active"
}

{
  "language": "en",
  "location": {
    "raw": "Huntington Beach, CA",
    "city": "Huntington Beach",
    "region": "CA",
    "country": "United States",
    "is_remote": false,
    "confidence": 0.9
  },
  "salary_max": null,
  "salary_min": null,
  "inferred_at": "2026-06-06T09:20:02.391Z",
  "launch_scope": {
    "reason": "english_us_canada",
    "included": true,
    "language": "en",
    "location": {
      "raw": "Huntington Beach, CA",
      "city": "Huntington Beach",
      "region": "CA",
      "country": "United States",
      "is_remote": false,
      "confidence": 0.9
    },
    "countries": [
      "United States"
    ]
  },
  "remote_policy": null,
  "salary_period": null,
  "workplace_type": "on_site",
  "salary_currency": null
}

{}

{
  "id": "dff389fe-4ea5-47e3-9ad6-deea546ea7d0",
  "team": "Mach Vehicles, Manufacturing",
  "title": "Manufacturing Engineer",
  "jobUrl": "https://jobs.ashbyhq.com/mach/dff389fe-4ea5-47e3-9ad6-deea546ea7d0",
  "address": null,
  "applyUrl": "https://jobs.ashbyhq.com/mach/dff389fe-4ea5-47e3-9ad6-deea546ea7d0/application",
  "isListed": true,
  "isRemote": false,
  "location": "Huntington Beach, CA",
  "updatedAt": null,
  "apiVersion": "ashby-non-user-graphql-v1",
  "department": "Mach Vehicles",
  "publishedAt": null,
  "workplaceType": "OnSite",
  "employmentType": "FullTime",
  "secondaryLocations": []
}