Aircraft Inspector NDT NAS410 Level 2 – 16429

AAR is the place of choice to build an inspiring career. Determines airworthiness of work performed. Examines aircraft, engines, components and materials by using NDT and visual means and records results of inspections to ensure continued airworthiness through accomplishment of the following duties: ESSENTIAL DUTIES AND RESPONSIBILITIES Process daily incoming and outgoing material to meet Quality Control requirements as stated in the AAR Procedures Manual and Customer Requirements Manual. Interface with suppliers / product line to disposition rejects. Perform NDT inspections in compliance with customer work instructions, and AAR procedures and policies. Record all inspection functions on applicable paperwork in accordance with the customer policies and procedures. Responsible for Non-Destructive Testing (NDT) of Aircraft and Components. Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the NDT method(s) as used by the employer. Shall be capable of assuming technical responsibility for the NDT facility and staff. Be capable of selecting the method and technique for a specific inspection. Be capable of preparing and verifying the adequacy of procedures and work instructions. Approve NDT procedures and work instructions for technical adequacy. Have a general knowledge of other NDT methods, product manufacturing, and inspection technologies used by the employer. When specified in the written practice, have a basic knowledge of aircraft or vehicle maintenance. Be capable of providing or directing training, examination, and certification of personnel. Conduct NDT for the acceptance of parts and document the results if a demonstration of proficiency in this ability was included in the practical examination. When specified in the written practice, be capable of auditing outside agencies to ensure the requirements of the written practice are met. All other duties as assigned. CORE COMPETENCIES Commitment to company values and ethics Dependability: personally responsible, completes work in a timely manner, and performs tasks accurately Motivation: must maintain a positive attitude and strong work energy Organization: very detail oriented and always comes prepared Communication: excellent interpersonal and oral and written communication skills Initiative: plans work and carries out tasks without detailed instructions, prepares for problems or opportunities in advance, undertakes additional responsibilities Strong judgment and decision making Analytical skills: must be able to gather information and use data to determine cause and effect for complex problem solving AAR is the place of choice to build an inspiring career. Determines airworthiness of work performed. Examines aircraft, engines, components and materials by using NDT and visual means and records results of inspections to ensure continued airworthiness through accomplishment of the following duties: ESSENTIAL DUTIES AND RESPONSIBILITIES Process daily incoming and outgoing material to meet Quality Control requirements as stated in the AAR Procedures Manual and Customer Requirements Manual. Interface with suppliers / product line to disposition rejects. Perform NDT inspections in compliance with customer work instructions, and AAR procedures and policies. Record all inspection functions on applicable paperwork in accordance with the customer policies and procedures. Responsible for Non-Destructive Testing (NDT) of Aircraft and Components. Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the NDT method(s) as used by the employer. Shall be capable of assuming technical responsibility for the NDT facility and staff. Be capable of selecting the method and technique for a specific inspection. Be capable of preparing and verifying the adequacy of procedures and work instructions. Approve NDT procedures and work instructions for technical adequacy. Have a general knowledge of other NDT methods, product manufacturing, and inspection technologies used by the employer. When specified in the written practice, have a basic knowledge of aircraft or vehicle maintenance. Be capable of providing or directing training, examination, and certification of personnel. Conduct NDT for the acceptance of parts and document the results if a demonstration of proficiency in this ability was included in the practical examination. When specified in the written practice, be capable of auditing outside agencies to ensure the requirements of the written practice are met. All other duties as assigned. CORE COMPETENCIES Commitment to company values and ethics Dependability: personally responsible, completes work in a timely manner, and performs tasks accurately Motivation: must maintain a positive attitude and strong work energy Organization: very detail oriented and always comes prepared Communication: excellent interpersonal and oral and written communication skills Initiative: plans work and carries out tasks without detailed instructions, prepares for problems or opportunities in advance, undertakes additional responsibilities Strong judgment and decision making Analytical skills: must be able to gather information and use data to determine cause and effect for complex problem solving QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. MINIMUM REQUIREMENTS FOR THE JOB: NAS410 Level II certification for one or more applicable Non-destructive Testing (NDT) disciplines, such as ultrasonic, eddy current. Ability to correctly use one or more types of applicable NDT equipment. 3-4 years experience in aircraft NAS410 Non-destructive Testing (NDT). Familiar with aircraft manufacturers technical documentation. Ability to read and interpret ADs, S/Bs, SRMs, industry NDT specifications and other work instructions. Familiar with regulatory requirements of FAR 145 repair station. FAA Airframe rating is required, both FAA Airframe and Powerplant (A&P) License preferred. EDUCATION and/or EXPERIENCE Associates degree (A.A.) or equivalent from 2-year college or technical school; or 4-years related experience and/or training; or Equivalent combination of education and experience. PHYSICAL DEMANDS/WORK ENVIRONMENT The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be regularly required to sit, stand, bend, reach and move about the facility. The environmental characteristic for this position is a warehouse setting. Candidates should be able to adapt to a traditional warehouse environment. Must be able to lift and carry up to 75 pounds and comply with OSHA standards #LI-TK1 #LI-DT1 QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. MINIMUM REQUIREMENTS FOR THE JOB: NAS410 Level II certification for one or more applicable Non-destructive Testing (NDT) disciplines, such as ultrasonic, eddy current. Ability to correctly use one or more types of applicable NDT equipment. 3-4 years experience in aircraft NAS410 Non-destructive Testing (NDT). Familiar with aircraft manufacturers technical documentation. Ability to read and interpret ADs, S/Bs, SRMs, industry NDT specifications and other work instructions. Familiar with regulatory requirements of FAR 145 repair station. FAA Airframe rating is required, both FAA Airframe and Powerplant (A&P) License preferred. EDUCATION and/or EXPERIENCE Associates degree (A.A.) or equivalent from 2-year college or technical school; or 4-years related experience and/or training; or Equivalent combination of education and experience. PHYSICAL DEMANDS/WORK ENVIRONMENT The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be regularly required to sit, stand, bend, reach and move about the facility. The environmental characteristic for this position is a warehouse setting. Candidates should be able to adapt to a traditional warehouse environment. Must be able to lift and carry up to 75 pounds and comply with OSHA standards #LI-TK1 #LI-DT1

{
  "content_hash": "33f07b5559564e2eb581d84249fa2285273ad1104efce77219260649d09f763c",
  "source_hash": "9e18e3f3e90dfae814f8b0c0933392caa2339146cd5e667e3922f5972d415d03",
  "last_changed_at": "2026-06-05T03:55:46.404Z",
  "active_status": "active"
}

{
  "language": "en",
  "location": {
    "raw": "United States-Oklahoma-Oklahoma City",
    "city": "Oklahoma City",
    "region": "OK",
    "country": "United States",
    "is_remote": false,
    "confidence": 0.95
  },
  "salary_max": null,
  "salary_min": null,
  "inferred_at": "2026-06-06T14:00:00.337Z",
  "launch_scope": {
    "reason": "english_us_canada",
    "included": true,
    "language": "en",
    "location": {
      "raw": "United States-Oklahoma-Oklahoma City",
      "city": "Oklahoma City",
      "region": "OK",
      "country": "United States",
      "is_remote": false,
      "confidence": 0.95
    },
    "countries": [
      "United States"
    ]
  },
  "remote_policy": null,
  "salary_period": "day",
  "workplace_type": null,
  "salary_currency": null
}

{}

{
  "list_job": {
    "raw": {
      "draft": false,
      "jobId": "293144",
      "column": [
        "Aircraft Inspector NDT NAS410 Level 2 – 16429 ",
        "[\"United States-Oklahoma-Oklahoma City\"]",
        "May 22, 2026"
      ],
      "hotJob": false,
      "contestNo": "16429",
      "toReApply": false,
      "linkedColumn": 0,
      "addedToJobCart": false,
      "alreadyAppliedOn": false,
      "locationsColumns": [
        1
      ]
    },
    "jobId": "293144",
    "title": "Aircraft Inspector NDT NAS410 Level 2 – 16429",
    "legacy": false,
    "category": null,
    "schedule": null,
    "contestNo": "16429",
    "detailUrl": "https://aarcorp.taleo.net/careersection/aar_mobile/jobdetail.ftl?job=293144&lang=en",
    "locations": [
      "United States-Oklahoma-Oklahoma City"
    ],
    "postingDate": "May 22, 2026"
  },
  "detail_meta": {
    "url": "https://aarcorp.taleo.net/careersection/aar_mobile/jobdetail.ftl?job=293144&lang=en",
    "http_status": 200,
    "content_type": "text/html;charset=UTF-8",
    "response_bytes": 83503
  },
  "detail_errors": [],
  "detail_values_count": 37
}