bluedoor data·Job Postings API·bluedoor.sh ↗

HomeCompaniesCareers Ishpi Icims ComACCAS Technician (on-site)

ACCAS Technician (on-site)

Careers Ishpi Icims Com · Portsmouth, VA, US · On Site · Active · $74,000–$77,000 / year · iCIMS

Job facts

FieldValue
CompanyCareers Ishpi Icims Com
TitleACCAS Technician (on-site)
Normalized title-
Department / teamC5ISR Eng &Tech
LocationPortsmouth, VA, United States
Work modelOn Site
Employment typeFull Time
Salary$74,000–$77,000 / year
Statusactive
ATS provideriCIMS
Posted / first seen2024-06-21 / 2026-06-18
Changed / last seen2026-06-21 / 2026-06-21

Related slices

PageWhat it containsOpen
Company jobsActive postings from Careers Ishpi Icims Com.Open
Company breakdownsRole, location, ATS, and work model facets for this company.Open
ATS provider jobsActive postings observed through iCIMS.Open
Provider filtered searchThe same provider as a filtered job collection.Open
City jobsActive postings in Portsmouth.Open
Department jobsActive postings in C5ISR Eng &Tech.Open
Work model jobsActive On Site postings.Open
Lifecycle eventsOpen, update, close, and reopen events for this posting.Open
Original postingCanonical source or apply URL captured from the ATS.Open

Linked records

CompanyCareers Ishpi Icims Com
Sourcea3b28b43-3704-4739-bb4b-7679c87a862c
ATS provideriCIMS

Description

Overview ISHPI is seeking a ACCAS Technician (on-site) to support the Command and Control (C2) Afloat Integration Support (C2AIS) for the U.S. Coast Guard Command, Control, Communications, Computers, Cyber and Intelligence Service Center (C5ISC) in Portsmouth, VA. Responsibilities Contractor must assemble, configure, and interface Pinpoint hardware systems and sub-systems into one complete, centralized automated testing console. Develop and interface existing hardware fixtures for automated testing of new circuit card assemblies at the Portsmouth facility and develop and fabricate new test fixtures for testing development and use. Must be able to fabricate test jigs in conjunction with reverse engineering of COTS equipment when required. Contractor must provide Silver/Gold Disk routines for Coast Guard Owned (CGO) equipment as assigned by C5ISC Portsmouth in accordance with Ref o. Contractor must provide analysis of systems, sub-systems, electronic circuit cards, assemblies, and subassemblies to determine feasibility of cost effectiveness. Contractor must work with C5ISC Product Lines and Shared Services to research, engineer, develop, and perform technical field changes on C5ISC LAB equipment and systems. Contractor must provide test equipment/support equipment inventory including planned maintenance system/calibration requirements. Contractor must assist in administrative support such as procurement requests for signature only by government personnel. Contractor must provide assistance with administrative services to include maintaining the ACCAS technical library. Contractor must assist with property/inventory control management in action with (IAW) Compliance Document ref (a) and (b) and must maintain the property/inventory report. Qualifications Education and Experience: Associate degree in engineering technology or completion of USCG or DOD Technical “A” School is required. Minimum eight (8) years of experience in maintenance and installation of DOD or USCG Command, Control, and Communication Systems is required. Must have professional training in related field. Specific minimum qualification requirements include. 3.1.1 Proficiency with operating, programming and modification of Automated Test Equipment software utilizing Pinpoint applications in a Windows based environment. Must have an adequate background utilizing Pinpoint Graphic User Interface (GUI) interface associated with developing automated tests.) Must possess a strong working knowledge of the Microsoft SharePoint and CG Portal to include the gene ration of required pages, processes and gather metrics for directed dashboards and information dissemination. Must be well versed EEPROM capture, decoding and managing file databases associated with programming.3.1.2 Ability to assemble, configure and interface Pinpoint hardware systems and sub-systems into one complete, centralized automated testing console. Must be competent in developing and interfacing existing hardware for automated testing of circuit card assemblies. Must be competent in developing and fabricating new test fixtures for testing development.3.1.3 Must be Pinpoint certified or must become certified within six months.3.1.4 Must have an MTR Technician (MTR) Certification or have held a previous certification and be able to recertify via 2M/MTR inspector. Personnel must recertify every 18 months via 2M/MTR Inspectors.3.1.5 Must be a certified MTR Gold Disk developer via school at NUWC Det Norfolk and maintain certification requirements. 3.1.6 Must have a Microminiature Electronics Repair Technician (MC) or previously held certification and be able to recertify via 2M/MTR inspector. Personnel must recertify every 18 months via 2M/MTR Inspectors. Security Clearance: Requires U.S. Citizenship and ability to obtain and maintain a U.S. Coast Guard public trust. “Ishpi Information Technologies, Inc. is an Equal Opportunity Employer. All qualified candidates will be considered without regard to legally protected characteristics. Pay Rate: The annual base salary range for this position is $74,000 - $77,000 . Please note that any salary information disclosed is a general guideline only. Ishpi considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified, you may be contacted for this and future openings. *cj

Full job record

Job ID85776f9aca384729691493eaf63731776eac7873
Org ID74c8bd2e-6616-41ec-841e-27afabe00fb1
Source IDa3b28b43-3704-4739-bb4b-7679c87a862c
Board IDa3b28b43-3704-4739-bb4b-7679c87a862c
Providericims
Provider Job Key1898
TitleACCAS Technician (on-site)
Normalized Title
Statusactive
Activeyes
Location TextPortsmouth, VA, US
DepartmentC5ISR Eng &Tech
Team
Employment Typefull_time
Workplace Typeon_site
Remote Policy
CountryUnited States
RegionVA
CityPortsmouth
Salary RawOverview ISHPI is seeking a ACCAS Technician (on-site) to support the Command and Control (C2) Afloat Integration Support (C2AIS) for the U.S. Coast Guard Command, Control, Communications, Computers, Cyber and Intelligence Service Center (C5ISC) in Portsmouth, VA. Responsibilities Contractor must assemble, configure, and interface Pinpoint hardware systems and sub-systems into one complete, centralized automated testing console. Develop and interface existing hardware fixtures for automated testing of new circuit card assemblies at the Portsmouth facility and develop and fabricate new test fixtures for testing development and use. Must be able to fabricate test jigs in conjunction with reverse engineering of COTS equipment when required. Contractor must provide Silver/Gold Disk routines for Coast Guard Owned (CGO) equipment as assigned by C5ISC Portsmouth in accordance with Ref o. Contractor must provide analysis of systems, sub-systems, electronic circuit cards, assemblies, and subassemblies to determine feasibility of cost effectiveness. Contractor must work with C5ISC Product Lines and Shared Services to research, engineer, develop, and perform technical field changes on C5ISC LAB equipment and systems. Contractor must provide test equipment/support equipment inventory including planned maintenance system/calibration requirements. Contractor must assist in administrative support such as procurement requests for signature only by government personnel. Contractor must provide assistance with administrative services to include maintaining the ACCAS technical library. Contractor must assist with property/inventory control management in action with (IAW) Compliance Document ref (a) and (b) and must maintain the property/inventory report. Qualifications Education and Experience: Associate degree in engineering technology or completion of USCG or DOD Technical “A” School is required. Minimum eight (8) years of experience in maintenance and installation of DOD or USCG Command, Control, and Communication Systems is required. Must have professional training in related field. Specific minimum qualification requirements include. 3.1.1 Proficiency with operating, programming and modification of Automated Test Equipment software utilizing Pinpoint applications in a Windows based environment. Must have an adequate background utilizing Pinpoint Graphic User Interface (GUI) interface associated with developing automated tests.) Must possess a strong working knowledge of the Microsoft SharePoint and CG Portal to include the gene ration of required pages, processes and gather metrics for directed dashboards and information dissemination. Must be well versed EEPROM capture, decoding and managing file databases associated with programming.3.1.2 Ability to assemble, configure and interface Pinpoint hardware systems and sub-systems into one complete, centralized automated testing console. Must be competent in developing and interfacing existing hardware for automated testing of circuit card assemblies. Must be competent in developing and fabricating new test fixtures for testing development.3.1.3 Must be Pinpoint certified or must become certified within six months.3.1.4 Must have an MTR Technician (MTR) Certification or have held a previous certification and be able to recertify via 2M/MTR inspector. Personnel must recertify every 18 months via 2M/MTR Inspectors.3.1.5 Must be a certified MTR Gold Disk developer via school at NUWC Det Norfolk and maintain certification requirements. 3.1.6 Must have a Microminiature Electronics Repair Technician (MC) or previously held certification and be able to recertify via 2M/MTR inspector. Personnel must recertify every 18 months via 2M/MTR Inspectors. Security Clearance: Requires U.S. Citizenship and ability to obtain and maintain a U.S. Coast Guard public trust. “Ishpi Information Technologies, Inc. is an Equal Opportunity Employer. All qualified candidates will be considered without regard to legally protected characteristics. Pay Rate: The annual base salary range for this position is $74,000 - $77,000 . Please note that any salary information disclosed is a general guideline only. Ishpi considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified, you may be contacted for this and future openings. *cj
Salary Min74,000
Salary Max77,000
Salary CurrencyUSD
Salary Periodyear
Source URLhttps://careers-ishpi.icims.com/jobs/1898/accas-technician-%28on-site%29/job
Apply URLhttps://careers-ishpi.icims.com/jobs/1898/accas-technician-%28on-site%29/job
First Seen At2026-06-18 08:35:11Z
Last Seen At2026-06-21 08:37:06Z
Last Checked At2026-06-21 08:37:06Z
Last Changed At2026-06-21 08:37:06Z
Inactive At
Source Posted At2024-06-21 08:37:06Z
Source Updated At2026-06-18 17:55:39Z
Raw Payload Uris3://job-postings-prod-raw-590183727216/raw/provider=icims/board=careers-ishpi.icims.com/date=2026-06-21/2026-06-21T08-37-05-990Z-53f85a6412f9614b0c1b69ce44ab47b724d23b2c55b7fb53c1f0f328eb3cdeb9.json
Event Fields
{
  "content_hash": "aa715e0dfe01af5db7ada97217926d2e02a782f5e602e61a116aec253b7710d2",
  "source_hash": "ba4236e231663a1027c3988cc0b12737ca83d0bf622a4beec33efeef1367cf79",
  "last_changed_at": "2026-06-21T08:37:06.805Z",
  "active_status": "active"
}
Parsed Structured
{
  "dedupe": null,
  "language": "en",
  "location": {
    "raw": "Portsmouth, VA, US",
    "city": "Portsmouth",
    "region": "VA",
    "country": "United States",
    "is_remote": false,
    "confidence": 0.8
  },
  "salary_max": 77000,
  "salary_min": 74000,
  "inferred_at": "2026-06-21T08:37:06.769Z",
  "launch_scope": {
    "reason": "english_us_canada",
    "included": true,
    "language": "en",
    "location": {
      "raw": "Portsmouth, VA, US",
      "city": "Portsmouth",
      "region": "VA",
      "country": "United States",
      "is_remote": false,
      "confidence": 0.8
    },
    "countries": [
      "United States"
    ]
  },
  "remote_policy": null,
  "salary_period": "year",
  "workplace_type": "on_site",
  "salary_currency": "USD"
}
Extensions
{}
Native Structured
{
  "json_ld": {
    "url": "https://careers-ishpi.icims.com/jobs/1898/accas-technician-%28on-site%29/job",
    "@type": "JobPosting",
    "title": "ACCAS Technician (on-site)",
    "@context": "http://schema.org",
    "datePosted": "2024-06-21T08:37:06.297Z",
    "description": "<h2>Overview</h2>\n<p>ISHPI is seeking a ACCAS Technician (on-site) to support the Command and Control (C2) Afloat Integration Support (C2AIS) for the U.S. Coast Guard Command, Control, Communications, Computers, Cyber and Intelligence Service Center (C5ISC) in Portsmouth, VA.  </p>\n<h2>Responsibilities</h2>\n<ul>\n <li>Contractor must assemble, configure, and interface Pinpoint hardware systems and sub-systems into one complete, centralized automated testing console.</li>\n <li>Develop and interface existing hardware fixtures for automated testing of new circuit card assemblies at the Portsmouth facility and develop and fabricate new test fixtures for testing development and use. Must be able to fabricate test jigs in conjunction with reverse engineering of COTS equipment when required. </li>\n <li>Contractor must provide Silver/Gold Disk routines for Coast Guard Owned (CGO) equipment as assigned by C5ISC Portsmouth in accordance with Ref o.</li>\n <li>Contractor must provide analysis of systems, sub-systems, electronic circuit cards, assemblies, and subassemblies to determine feasibility of cost effectiveness. </li>\n <li>Contractor must work with C5ISC Product Lines and Shared Services to research, engineer, develop, and perform technical field changes on C5ISC LAB equipment and systems. </li>\n <li>Contractor must provide test equipment/support equipment inventory including planned maintenance system/calibration requirements. </li>\n <li>Contractor must assist in administrative support such as procurement requests for signature only by government personnel. </li>\n <li>Contractor must provide assistance with administrative services to include maintaining the ACCAS technical library. </li>\n <li>Contractor must assist with property/inventory control management in action with (IAW) Compliance Document ref (a) and (b) and must maintain the property/inventory report.</li>\n</ul>\n<h2>Qualifications</h2>\n<p><strong>Education and Experience:</strong> Associate degree in engineering technology or completion of USCG or DOD Technical “A” School is required. Minimum eight (8) years of experience in maintenance and installation of DOD or USCG Command, Control, and Communication Systems is required.</p>\n<p> </p>\n<p>Must have professional training in related field.</p>\n<p> </p>\n<p>Specific minimum qualification requirements include.</p>\n<p>3.1.1 Proficiency with operating, programming and modification of Automated Test Equipment software utilizing Pinpoint applications in a Windows based environment. Must have an adequate background utilizing Pinpoint Graphic User Interface (GUI) interface associated with developing automated tests.) Must possess a strong working knowledge of the Microsoft SharePoint and CG Portal to include the gene</p>\n<p>ration of required pages, processes and gather metrics for directed dashboards and information dissemination. Must be well versed EEPROM capture, decoding and managing file databases associated with programming.3.1.2 Ability to assemble, configure and interface Pinpoint hardware systems and sub-systems into one complete, centralized automated testing console. Must be competent in developing and interfacing existing hardware for automated testing of circuit card assemblies. Must be competent in developing and fabricating new test fixtures for testing development.3.1.3 Must be Pinpoint certified or must become certified within six months.3.1.4 Must have an MTR Technician (MTR) Certification or have held a previous certification and be able to recertify via 2M/MTR inspector. Personnel must recertify every 18 months via 2M/MTR Inspectors.3.1.5 Must be a certified MTR Gold Disk developer via school at NUWC Det Norfolk and maintain certification requirements. 3.1.6 Must have a Microminiature Electronics Repair Technician (MC) or previously held certification and be able to recertify via 2M/MTR inspector. Personnel must recertify every 18 months via 2M/MTR Inspectors.</p>\n<p><strong>Security Clearance:</strong>  Requires U.S. Citizenship and ability to obtain and maintain a U.S. Coast Guard public trust. </p>\n<p> </p>\n<p><strong>“Ishpi Information Technologies, Inc. is an Equal Opportunity Employer. </strong>All qualified candidates will be considered without regard to legally protected characteristics.</p>\n<p> </p>\n<p><strong>Pay Rate:</strong>The annual base salary range for this position is <strong>$74,000 - $77,000</strong>. Please note that any salary information disclosed is a general guideline only. <strong>Ishpi</strong> considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer.</p>\n<p> </p>\n<p><strong>Expression of Interest: </strong>By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified, you may be contacted for this and future openings.</p>\n<p> </p>\n<p>*cj</p>\n<p> </p>",
    "directApply": true,
    "jobLocation": [
      {
        "@type": "Place",
        "address": {
          "@type": "PostalAddress",
          "postalCode": "23703",
          "addressRegion": "VA",
          "streetAddress": "4000 Coast Guard Blvd",
          "addressCountry": "US",
          "addressLocality": "Portsmouth",
          "postOfficeBoxNumber": "UNAVAILABLE"
        }
      }
    ],
    "validThrough": "2027-06-21T08:37:06.297Z",
    "employmentType": "FULL_TIME",
    "hiringOrganization": {
      "name": "Ishpi Information Technologies, Inc",
      "@type": "Organization",
      "sameAs": "https://careers-ishpi.icims.com/"
    },
    "occupationalCategory": "C5ISR Eng &Tech"
  },
  "detail_meta": {
    "url": "https://careers-ishpi.icims.com/jobs/1898/accas-technician-%28on-site%29/job?in_iframe=1",
    "http_status": 200,
    "content_type": "text/html;charset=UTF-8",
    "response_bytes": 37478,
    "compact_response_bytes": 6217,
    "original_response_bytes": 37478
  },
  "sitemap_job": {
    "id": "1898",
    "url": "https://careers-ishpi.icims.com/jobs/1898/accas-technician-%28on-site%29/job",
    "slug": "accas-technician-%28on-site%29",
    "lastmod": "2026-06-18T13:55:39-04:00"
  },
  "detail_errors": []
}
Get this page with API

Rendered from the bluedoor Job Postings API. Reproduce it:

GET https://api.bluedoor.sh/job-postings/v1/jobs/85776f9aca384729691493eaf63731776eac7873?include=descriptionJSON
GET https://api.bluedoor.sh/job-postings/v1/orgs/74c8bd2e-6616-41ec-841e-27afabe00fb1JSON
GET https://api.bluedoor.sh/job-postings/v1/sources/a3b28b43-3704-4739-bb4b-7679c87a862cJSON
GET https://api.bluedoor.sh/job-postings/v1/jobs/85776f9aca384729691493eaf63731776eac7873/eventsJSON