Automation & Controls Engineer, Launch Pad (Starship)

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. AUTOMATION & CONTROLS ENGINEER, LAUNCH PAD (STARSHIP) SpaceX’s Starship spacecraft and Super Heavy rocket, collectively known as Starship, is a fully reusable transportation system designed to carry crew and cargo to Earth orbit, the Moon, Mars, and beyond. We are looking for an automation & controls engineer to develop and build launch and test systems for Starship, focusing on electrical control systems for the launch mount, integration tower, and orbital propellant farm, including input/output (I/O), motion systems, drive controls, and supporting infrastructure. The successful candidate will join a highly talented team of engineers with a proven track record of developing advanced automated solutions. RESPONSIBILITIES: Electrical systems: Architect, design, integrate, and commission control systems for the Starship launch pads Design industrial electrical control panels that are National Fire Protection Association 79 (NFPA 79)/National Electrical Code (NEC)/Underwriters Laboratories 508A (UL 508A) compliant Design control and data acquisition systems Design and author electrical schematics Design electrical conveyance and distribution systems (e.g., raceways, cables, wiring methods) Work closely with other disciplines; interface control systems with high-power equipment and communication equipment Design electrical systems for hazardous environments Control software: Architect, write, and debug programmable logic controller (PLC) code with an emphasis on generating code that is organized, structured, documented, maintainable, and reusable for similar applications Configure, commission, and tune variable frequency drives (VFDs) for open- and closed-loop control system applications Generate aesthetically simple human-machine interface (HMI) screens for complex machinery while providing sufficient feedback for troubleshooting Commission devices using a variety of industrial communication protocols Set up and tune proportional-integral-derivative (PID) controllers for continuous processes Mechanical integration: Add detail for electrical assemblies to computer-aided design (CAD) models to plan out installation for cable tray, conduit, panel mounting, etc. Design systems that are robust to the mechanical stresses of Starship launch General responsibilities: Participate in initial equipment conceptual development and carefully balance product specifications, requirements, layout complexity, cost, and lead-time limits Manage electrical cabinet builds, field wiring, and conveyance installs Set, implement, and maintain schedules and budgets to ensure project completion Document control system built for handoff to pad operators BASIC QUALIFICATIONS: Bachelor's degree in an engineering discipline 1+ years of experience in the design and commissioning of control systems for industrial applications (internship experience qualifies) PREFERRED SKILLS AND EXPERIENCE: Electrical schematic CAD experience using EPLAN Mechanical design experience with CAD, such as Siemens NX or SolidWorks Field bus networks, serial communication, and Ethernet communication Hands-on experience building and commissioning high-quality electrical control panels and electro-mechanical systems Knowledge of NEC, UL 508A codes Experience in fast-paced iterative design and test environments Experience solving complex problems with little to no supervision on schedule as an individual or as a member of an integrated team Strong work ethic and drive to succeed as part of a high-functioning team Ability to rapidly change roles/responsibilities while working in a high-paced, challenging work environment Ability to thrive in ambiguity, independently drive project progress, and manage multiple priorities Fundamental understanding of engineering principles behind electronic equipment, instrumentation, and commonly used industrial equipment Experience designing and installing instrumentation and control systems in hazardous areas (National Fire Protection Association 70 (NFPA 70) Section 500 installations); Class 1, Division 1 and Division 2 environments or International Electrotechnical Commission (IEC) equivalence Experience with electrical power distribution, working knowledge of NFPA 70 and NFPA 70E Experience with industrial bus protocols such as Modbus, Profinet, and EtherNet/IP ADDITIONAL REQUIREMENTS: Must be willing to work extended hours and/or weekends as needed Must be willing to travel for extended periods, up to 100% during system activation Ability to travel to other SpaceX or third-party facilities (up to 20%) Ability to pass Air Force background checks for Cape Canaveral and Vandenberg Stand: Up to 6 hours per day Sit: Up to 6 hours per day Push/Pull: Up to 50 lbs. (unassisted) between 1 and 2 hours per day Overhead reach: Up to 3 hours per day Walk: Up to 10 hours per day Lift/Carry: Up to 25 lbs. (unassisted) between 1 and 2 hours per day Climb (ladder/stairs): up to 3 hours per day Kneel/Crouch: up to 3 hours per day Upper body twist: Up to 3 hours per day Ability to work in temperatures over 80 degrees: up to 6 hours per day Candidate must be capable of safely working at heights (up to 500ft), in confined spaces, using an air purifying respirator, operating heavy equipment and machinery, and performing the physical requirements of the job listed in the job description. Candidate may be required to complete a pre-employment questionnaire and/or physical to confirm these capabilities, which may include a medical history review. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here . SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to [email protected] .

{
  "content_hash": "34b65a41c3fc465cb2d926791e3eef5d2974fd13ce70a40ba3931fd7fe04f883",
  "source_hash": "9506b3907dbd996040933b0d27be6b8506e26f2039059b9cdaf5b9aaf4c001dc",
  "last_changed_at": "2026-05-29T22:39:56.497Z",
  "active_status": "active"
}

{
  "language": "en",
  "location": {
    "raw": "Starbase, TX",
    "city": "Starbase",
    "region": "TX",
    "country": "United States",
    "is_remote": false,
    "confidence": 0.9
  },
  "salary_max": null,
  "salary_min": null,
  "inferred_at": "2026-06-06T19:14:55.532Z",
  "launch_scope": {
    "reason": "english_us_canada",
    "included": true,
    "language": "en",
    "location": {
      "raw": "Starbase, TX",
      "city": "Starbase",
      "region": "TX",
      "country": "United States",
      "is_remote": false,
      "confidence": 0.9
    },
    "countries": [
      "United States"
    ]
  },
  "remote_policy": null,
  "salary_period": null,
  "workplace_type": null,
  "salary_currency": null
}

{}

{
  "title": "Automation & Controls Engineer, Launch Pad (Starship)",
  "offices": [
    {
      "id": 4001111002,
      "name": "Starbase, TX",
      "location": "Brownsville, TX, United States",
      "child_ids": [],
      "parent_id": null
    }
  ],
  "language": "en",
  "location": {
    "name": "Starbase, TX"
  },
  "metadata": [
    {
      "id": 4010460002,
      "name": "Employment Type",
      "value": "Regular",
      "value_type": "single_select"
    },
    {
      "id": 4026103002,
      "name": "Discipline",
      "value": "Engineering - Electrical",
      "value_type": "single_select"
    },
    {
      "id": 28070425002,
      "name": "Program",
      "value": [
        "Starship"
      ],
      "value_type": "multi_select"
    },
    {
      "id": 4028954002,
      "name": "Description",
      "value": null,
      "value_type": "long_text"
    }
  ],
  "updated_at": "2026-05-08T13:28:29-04:00",
  "departments": [
    {
      "id": 4093594002,
      "name": "Launch Fluids Engineering - Starbase",
      "child_ids": [],
      "parent_id": null
    }
  ],
  "company_name": "SpaceX",
  "requisition_id": 6409408002,
  "first_published": "2026-05-08T13:28:29-04:00",
  "application_deadline": null
}