Senior Product Support Engineer (Multilane, Penang)

{
  "content_hash": "c2d1417a6a9c020bfc18416fe3b06d9e5f90e442a63112ffc45f0b68fea0405a",
  "source_hash": "70dcf6b5bdca38c5b9fcfacc04aeae288516b06eeabea0d32b6ed9d645960c38",
  "last_changed_at": "2026-06-23T14:23:01.739Z",
  "active_status": "active"
}

{
  "dedupe": null,
  "language": "en",
  "location": {
    "raw": "Location: Bukit Minyak Area, onsite at Mainland Penang contract manufacturing site\n Our Purpose\n TERADYNE, where experience meets innovation and driving excellence in every connection. We are fueled by creativity and diversity of thought and in our workforce. Our employees are supported to innovate and learn something new every day.\nWe cultivate a culture of inclusion for all employees that respects their individual strengths, views, and experiences. We believe that our differences enable us to be a better team – one that makes better decisions, drives innovation and delivers better business results.\nOpportunity Overview\n As a critical member of Teradyne’s product test group, you will be responsible for supporting hardware engineering activities supporting test & measurement product lines in several revolutionary wireless, high speed I/O test solutions, and optical test technologies. This is a hands-on hardware engineering role focused on pre-post-ramp sustaining activities in the factory and field. It involves active participation across cross functional teams such areas Test SW, Firmware teams, Quality, New Product Introduction (NPI), R&D, Field Services, Application Engineering etc. This role will primarily be focused on supporting Teradyne’s manufacturing efforts at its Contract Manufacturer site.\n Troubleshoot hardware and root cause analog, digital, high speed optical, and RF issues to module and component level.\n Identify common HW failure patterns, draft plans to address them and use data analysis tools to optimize and improve test methods and limits to help deliver quality products.\n Set up and perform RF and precision photonics measurements, such as compression (P1dB), phase noise, gain, spurious emissions, S parameter measurements, BER, eye diagrams, jitter, optical power, wavelength, extinction ratio, and related photonics metrics.\n Use production and manufacturing knowledge to drive improvement in board and system designs.\n Consistent focus on overall HW yield enhancement, reliability improvement and other continuous improvement processes and procedures.\n Ensure all products leaving the factory meet the manufacturability, quality, functional specification, and cost requirements.\n Ensure production processes, assembly documentation and test procedures are in place to meet the highest outgoing quality standards.\n Manage and execute hardware deviations, change requests and Engineering Change Orders (ECO) during various manufacturing stages.\n Responsible for optimization of test parameters, test times, touch times, and test station designs with a goal to drive down manufacturing costs.\n Disciplined monitoring and communication of product status and any issues encountered throughout the manufacturing process.\n Manage technical communication between LitePoint teams and Contract Manufacturing (CM) during various stages of production build and become a pivotal part in conflict resolution and finding technical solutions.\n Implement technical debug plans and train test engineers and technicians to drive down debug and re-test time to optimize production and delivery costs.\n Work with third party vendors regarding component qualification and other characterization activities.\n Familiarity with PCBA schematics, PCBA layout and fabrication drawings, and electronic BOMs.\n Strong understanding and functional knowledge of various RF lab equipment such as Network Analyzers, Spectrum Analyzers, Phase Noise Analyzers, Signal Analyzers, PXIe systems, tunable lasers, BERTs, DSOs, and TDRs.\n All About You\n We seek individuals who share our passion and determination. Our commitment to customer success drives us to go the extra mile. If you’re ready to join us in this mission, take a closer look at the minimum criteria for the position.\n BA/BS (",
    "city": "Location: Bukit Minyak Area",
    "region": null,
    "country": "United States",
    "is_remote": false,
    "confidence": 0.95
  },
  "salary_max": null,
  "salary_min": null,
  "inferred_at": "2026-06-23T14:23:01.365Z",
  "launch_scope": {
    "reason": "english_us_canada",
    "included": true,
    "language": "en",
    "location": {
      "raw": "Location: Bukit Minyak Area, onsite at Mainland Penang contract manufacturing site\n Our Purpose\n TERADYNE, where experience meets innovation and driving excellence in every connection. We are fueled by creativity and diversity of thought and in our workforce. Our employees are supported to innovate and learn something new every day.\nWe cultivate a culture of inclusion for all employees that respects their individual strengths, views, and experiences. We believe that our differences enable us to be a better team – one that makes better decisions, drives innovation and delivers better business results.\nOpportunity Overview\n As a critical member of Teradyne’s product test group, you will be responsible for supporting hardware engineering activities supporting test & measurement product lines in several revolutionary wireless, high speed I/O test solutions, and optical test technologies. This is a hands-on hardware engineering role focused on pre-post-ramp sustaining activities in the factory and field. It involves active participation across cross functional teams such areas Test SW, Firmware teams, Quality, New Product Introduction (NPI), R&D, Field Services, Application Engineering etc. This role will primarily be focused on supporting Teradyne’s manufacturing efforts at its Contract Manufacturer site.\n Troubleshoot hardware and root cause analog, digital, high speed optical, and RF issues to module and component level.\n Identify common HW failure patterns, draft plans to address them and use data analysis tools to optimize and improve test methods and limits to help deliver quality products.\n Set up and perform RF and precision photonics measurements, such as compression (P1dB), phase noise, gain, spurious emissions, S parameter measurements, BER, eye diagrams, jitter, optical power, wavelength, extinction ratio, and related photonics metrics.\n Use production and manufacturing knowledge to drive improvement in board and system designs.\n Consistent focus on overall HW yield enhancement, reliability improvement and other continuous improvement processes and procedures.\n Ensure all products leaving the factory meet the manufacturability, quality, functional specification, and cost requirements.\n Ensure production processes, assembly documentation and test procedures are in place to meet the highest outgoing quality standards.\n Manage and execute hardware deviations, change requests and Engineering Change Orders (ECO) during various manufacturing stages.\n Responsible for optimization of test parameters, test times, touch times, and test station designs with a goal to drive down manufacturing costs.\n Disciplined monitoring and communication of product status and any issues encountered throughout the manufacturing process.\n Manage technical communication between LitePoint teams and Contract Manufacturing (CM) during various stages of production build and become a pivotal part in conflict resolution and finding technical solutions.\n Implement technical debug plans and train test engineers and technicians to drive down debug and re-test time to optimize production and delivery costs.\n Work with third party vendors regarding component qualification and other characterization activities.\n Familiarity with PCBA schematics, PCBA layout and fabrication drawings, and electronic BOMs.\n Strong understanding and functional knowledge of various RF lab equipment such as Network Analyzers, Spectrum Analyzers, Phase Noise Analyzers, Signal Analyzers, PXIe systems, tunable lasers, BERTs, DSOs, and TDRs.\n All About You\n We seek individuals who share our passion and determination. Our commitment to customer success drives us to go the extra mile. If you’re ready to join us in this mission, take a closer look at the minimum criteria for the position.\n BA/BS (",
      "city": "Location: Bukit Minyak Area",
      "region": null,
      "country": "United States",
      "is_remote": false,
      "confidence": 0.95
    },
    "countries": [
      "United States"
    ]
  },
  "remote_policy": null,
  "salary_period": "day",
  "workplace_type": "on_site",
  "salary_currency": null
}

{}

{
  "list_job": {
    "jobId": "1389385700",
    "title": "Title",
    "rawHref": "/LitePoint/job/PENANG-Senior-Product-Support-Engineer-%28Multilane%2C-Penang%29/1389385700/",
    "detailUrl": "https://jobs.teradyne.com/LitePoint/job/PENANG-Senior-Product-Support-Engineer-%28Multilane%2C-Penang%29/1389385700/"
  },
  "detail_meta": {
    "url": "https://jobs.teradyne.com/LitePoint/job/PENANG-Senior-Product-Support-Engineer-%28Multilane%2C-Penang%29/1389385700/",
    "http_status": 200,
    "content_type": "text/html;charset=UTF-8",
    "response_bytes": 93261
  },
  "detail_errors": []
}